The maintenance and care of the belt drive system in different temperature environments requires the following special attention:

1.High temperature environment: In a high temperature environment, the belt may stretch due to thermal expansion, resulting in a decrease in tension. The belt tension needs to be checked regularly and adjusted in time. At the same time, high temperatures may accelerate the aging of the belt material, so it is necessary to use heat-resistant belts and pay attention to check whether the belt has signs of cracks, hardening or softening.

2.Low temperature environment: In low temperature environment, the belt may harden and become more brittle, increasing the risk of breakage. Ensure that the belt has sufficient warm-up time before starting and avoid drastic temperature changes in low temperature to reduce the brittleness of the material.

3.Humidity conditions: Humid environments may cause belt slippage or corrosion, especially in environments with corrosive gases. Choose belt materials with corrosion resistance and ensure that the pulleys and belts are clean and dry.

4.Cleaning and Lubrication: At any temperature, belts and pulleys should be cleaned regularly to prevent the accumulation of dust and dirt. At the same time, proper lubrication according to the manufacturer's recommendations will reduce friction and extend the life of the belt.

5.Regular inspections: Regardless of the environment, belts should be regularly inspected for wear, tension, alignment, and any unusual vibrations or noises. These inspections help identify and resolve problems before they become a problem, avoiding potential failures.

6.Spare parts availability: Ensure that spare parts for the selected belt are available in sufficient and reliable supply so that when the belt needs to be replaced, the spare parts can be obtained quickly, reducing downtime.

7.Professional consultation: If you have any questions about the selection or maintenance of the belt, it is recommended to consult professional transmission parts manufacturers or after-sales service personnel, who can provide professional advice and solutions based on specific application scenarios and needs.

By following these maintenance and care measures, you can ensure the effective operation of the belt drive system in different temperature environments and extend its service life.